manualshive.com logo in svg

Develcon Electronics Orbitor 6000, Инструкция по установке и эксплуатации

Поделиться
Скачать
Develcon Electronics Orbitor 6000 Скачать руководство пользователя страница 29

Applications

Orbitor 6000 Installation & Applications Guide — 

2.17

To configure the Orbitor 6000 to be an IPX router when both LAN segments contain
Novell servers, the IPX network numbers are learned automatically from the routing
information and service announcements sent by the servers.  The Orbitor will
automatically assign the IPX network numbers and proceed to route the IPX frames to the
appropriate destination network.

When two IPX LAN segments with Novell servers on each segment are to be
connected together with IPX routers, you must ensure that the IPX network
numbers on each of the Novell servers is 

unique

.  If the IPX network numbers are

the same, the IPX routers will not operate.

Once the WAN connections have been established to the remote partner Orbitors, the IPX
router portion of the Orbitors will begin to build their routing tables according to the IPX
frames they receive from the network.

The configuration options described here are only for initial set up and configuration
purposes.  For more complete information on all of the configuration parameters
available please refer to the Menu Reference Manual file on the accompanying
disks.

Содержание Orbitor 6000








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды