Develco ZHOT101 Скачать руководство пользователя страница 6

Страница: 6 / 20

Endpoints

The device implements the following standard HA devices on different end points.

3.1

ZigBee Device Object (ZDO)

•

End point number 0x00

•

Application profile Id 0x0000

•

Application device Id 0x0000

•

Supports all mandatory clusters

3.2

Occupancy Sensor

•

End point number 0x22, 0x28 and 0x29

•

Application profile Id 0x0104 (Home Automation)

•

Application device Id 0x0107

Each end point contains a logic module that can be configured to control the occupancy sensor signal

base on the user defined settings for the temperature sensor input or the user defined settings for the

light sensor input.

3.3

Temperatur Sensor

•

End point number 0x26

•

Application profile Id 0x0104 (Home Automation)

•

Application device Id 0x0302

3.4

Light Sensor

•

End point number 0x27

•

Application profile Id 0x0104 (Home Automation)

•

Application device Id 0x0106

3.5

Develco Utility

•

Application profile Id 0xC0C9 (Develco Products private profile)

•

Application device Id 0x0001

•

Private profile for internal Develco Products use only.

The DevUtil end point support a Develco products specified bootloader.

New firmware can be downloaded to the device using the SmartAMM SmartAMM client tool.

EFERENCE DOCUMENTS

053474r18ZB_CSG-ZigBee-Specification.pdf

075123r03ZB_AFG-ZigBee_Cluster_Library_Specification.pdf

053520r27ZB_HA_PTG-Home-Automation-Profile.pdf

075356r15ZB_ZSE-ZSE-AMI_Profile_Specification.pdf

They can all be downloaded from :

http://www.zigbee.org/Products/DownloadZigBeeTechnicalDocuments.aspx

Содержание ZHOT101





















Результаты поиска

Содержание ZHOT101

Отзывы:

Похожие инструкции для ZHOT101

Бренды по названию

Популярные бренды

Develco ZHOT101, Техническое руководство

Результаты поиска

Содержание ZHOT101

Отзывы:

Похожие инструкции для ZHOT101

Бренды по названию

Популярные бренды