13
5
MMI user guide
5.1
Push Button Menu:
Pushing the button on a device provides the user with several possibilities.
A single short push has a specific meaning for the given device, for this sensor a single short push will
toggle the occupancy status (occupied/unoccupied.). Pushing the button for longer (push, hold for a
few seconds, and release) allows the user to set the device into a desired mode. A mode change
happens at 5 second interval. Below, these modes are illustrated in a state chart.
When cycling through the menu modes, the state is indicated by a number of 100ms blinks on the
LED. As illustrated in the figure, the menu system allows for device specific modes (e.g. Pair Devices
for Devices such as relays and occupancy sensors).
5.2
Action upon Push Button Release
The number of blinks associated with a given mode entry is shown in the below table along with the
associated action performed upon user button release. As indicated, if the user holds the button past
the Reset to Factory Fresh Settings no action will result from the push button and the device stays in
the idle state.
Mode
Number of flashes on mode
menu entry
Availability
Action Taken upon Button
Release
Idle
None
All devices
None
Identify
1
All devices
Toggle Identify Mode
(On/Off)
Reset To Factory
Fresh Settings
Continuous flash (>8)
All Devices
Reset device to factory
fresh settings
