manualshive.com logo in svg

Devair HDI-01, Руководство по установке

Поделиться
Скачать
Devair HDI-01 Скачать руководство пользователя страница 17

Accessories - Beltguard Aftercoolers

Maximum working pressure of 175 psi (12.08 Bar).

Reduces the temperature of the compressed air by 
approximately 100°F to 125°F between the input 
and output of the Cooler

Piping to

Tank

Piping from 

Pump

1. There must be a minimum of 18” (0.5 m) 

between the Aftercooler and any obstruction.

2. Devair ‘OJ2000’ Oil must be used in the 

Compressor Pump.

3. The Beltguard Aftercooler must be cleaned on 

a regular basis with compressed air to ensure 
the unobstructed air flow through the cooler.

A Beltguard Aftercooler is designed to decrease the temperature of the compressed air as it exits the 
Compressor Pump and before it enters the Air Receiver Tank. The compressed air is cooled as it 
passes through the ‘radiator style’ Aftercooler, the air flow created by the draw of the Pump Flywheel as 
it turns.

When using a Beltguard Aftercooler, it is imperative that:

A) the Beltguard be at least the required minimum distance of 18” (0.5 m) from any obstruction or 

wall. With this design, maximum air flow through the Aftercooler is critical to both ensure the 
cooler works effectively and the Pump receives proper cooling.

B) the Oil used in the Pump be a synthetic oil, namely ‘Oj2000’.

If the above criteria are not met, the Aftercooler will not work effectively, and the Pump could fail 
prematurely.

What is the purpose of a Beltguard Aftercooler?

Specifications:

Important Information:

Maintenance:

The Beltguard Aftercooler must be cleaned with 
compressed air on a regular basis in order that 
any dust, residue, etc is removed and does not 
impede the air flow through the cooler. Failure to 
do this will result in premature Compressor 
failure.

Beltguard 

Aftercooler

 - 17 -

HDI-01

Mar ‘07

Distributed by:     CENTRAIR Air Systems & Supplies,    68 Hooper Rd., Unit 5, Barrie, ON  L4N 8Z9

                               Phone: 705-722-5747  Fax: 705-722-5458     [email protected]    www.centrair.ca

Содержание HDI-01

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды