DEVA SmartGen 6.0 Скачать руководство пользователя страница 57

Страница: 57 / 102

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 57 -

TA Timeout

An optional safety feature is built into the SmartGen 6.0 to guard against an extended software-

activated TA flag. For example, presuming that the TA flag has been activated via software

command and the data link is suddenly lost. A command that deactivates TA flag would not be

received, and the TA flag would remain raised indefinitely. As this is not acceptable, an automatic

timeout option has been included for software-activated TA flags.

In order for this function to be used – the interactive TA button should be enabled. The

timeout can be set from 1 to 255 minutes. This will automatically deactivate the TA flag after the

programmed time has elapsed.

NOTE

: The Timeout should not be used to define the actual period that the TA flag is raised.

The TA flag must be reset to zero immediately following a traffic announcement. Again, it’s best to

use the manual switch option for this command as described in

“Activating the TA Flag” on page 26

Dynamic PS

DPS is proprietary setting, which not conform with RDS/RBDS Standard. Because of driving

safety considerations, broadcasters have, from the start, been discouraged from making the PS

“dynamic”; that is, to send long messages in a succession of 8-character frames. As a matter of

note, it remains a violation of both the CENELEC and the NRSC standards to flash or scroll the PS

display. Nevertheless, this nefarious practice of “Scrolling-PS” has become very common, both in

the US and abroad.

The Dynamic PS can hold up to 64 characters of text, which can be made to scroll across the

RDS radio faceplate. Left undisturbed, the encoder will scroll the same message endlessly.

Parsing is the encoder’s “smart” mode of message transmission. Parsing breaks messages down

into meaningful character groups for efficient display on the 8-character alphanumeric readout

common to all RDS receivers.

When Parse is set to 0 (words centered) or 9 (words left justified) parsing sends short words

together. Longer words, up to and including 8 characters, are sent individually. Words that exceed

8 characters are “sidestepped” through two or more consecutive displays.

When Parse is set between 1 and 8 the message is scrolled 1 to 8 characters at a time without

divisions into word groups.

Содержание SmartGen 6.0







































































































Результаты поиска

Содержание SmartGen 6.0

Отзывы:

Похожие инструкции для SmartGen 6.0

Бренды по названию

Популярные бренды

DEVA SmartGen 6.0, Инструкция по техническому обслуживанию и эксплуатации

Результаты поиска

Содержание SmartGen 6.0

Отзывы:

Похожие инструкции для SmartGen 6.0

Бренды по названию

Популярные бренды