DEVA Broadcast Radio Explorer II, Инструкция по техническому обслуживанию и эксплуатации

Страница: 65 / 86

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 65 -
How to start a PI Campaign?
IMPORTANT: Prior to the set-up procedure, you will have to note that the campaigns (PI
and Logger) cannot be performed simultaneously. The PI campaign is with higher priority, thus
in order for a Logger mode campaign to be performed you will have to make sure that the PI
Campaign is disabled.
Prior to applying any settings, a connection to the device via the WEB Interface should be made.
1. Open the main application window and go to
Settings> PI Camp
tab;
2. Set the Campaign’s start time delay from the PI campaign box placed at the top of the
window;
3. Set the following parameters for each of the stations you would like to observe – PI/CALL,
Name of the station and Acquisition time (Radio Explorer II will automatically calculate
the PI to CALL and vice versa);
4. In order for a station to be included in the campaign, the [Ant1] button should be selected;
to exclude a station from the campaign the [Disable] button should be selected;
5. Steps from 2 to 4 should be applied for each of the channels to be monitored. Once all PI
Channels are set you can proceed to the last step;
6. Press the [Save] button to save the applied changes;
7. Disconnect the device from the local network connection and wait for the campaign to be
commenced.
NOTE:
In order for a Campaign to be commenced the device should be inactive for the specified
time. During the campaign, the device should be inactive. The front panel navigational menu,
WEB Interface and Device Manager Software should not be used.