DEVA Broadcast Radio Explorer II, Инструкция по техническому обслуживанию и эксплуатации

Страница: 45 / 86

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 45 -
HOW TO START A PI OR LOGGER CAMPAIGN USING THE
FRONT PANEL MENU?
IMPORTANT:
Prior to the set-up procedure:
• You will have to note that the campaigns (PI and Logger) cannot be performed simultaneously.
The PI campaign is with higher priority, thus in order for a Logger mode campaign to be
performed you will have to make sure that the PI Campaign is disabled.
• If the channels that you would like to monitor in RDS PI / RBDS CALL mode do not have
PI/CALL signs based on which the monitoring is made in this mode, we recommend you to
use the Logger mode.
In order to set up a campaign via the front panel menu, the following steps should be completed:
1. Press the [OK] button to enter the
Main Menu> Settings
and again press [OK];
2. Then select PI Campaign> PI Channel I ;
3. Specify name of the PI and for ‘Active’ - select Antenna 1;
4. Change the Acquisition time as per your preferences. We recommend setting it to 10 seconds;
5. Steps from 2 to 4 should be applied for each of the channels to be monitored. Once all PI
Channels are set you can proceed to the last step
6. Go to
Settings> PI Campaign> PI Campaign Mode
and as a value set 10 seconds. In order
for a campaign to be commenced the device should be inactive for the specified time.
The settings for Logger mode are identical with the PI Campaign settings, except for the menu
path which is
Main Menu> Settings> Logger> ...
NOTE:
The front panel inactivity time should expire prior the PI Campaign countdown to
begin.