DEVA Broadcast DB4005 Скачать руководство пользователя страница 79

Страница: 79 / 96

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 79 -

E-mail

Enter the desired alarm recipients in e-mail 1 and/or e-mail 2 fields. Fill in your e-mail account

settings: Sender, Username and Password, Server, SNMP port and connection type. It is mandatory

the type of connection with the server to be specified from Connection - Regular, Encrypted. The

Server port will be changed accordingly. Please note that the most commonly used port will be

entered in the field. If the port that is to be used is different, change it manually to the correct value.

If you experience difficulties in the set-up, or would like to use DEVA account for sending

of alarm email notifications, press the [DEVA] button option, and complete the recipient emails

(E-mail 1 and E-mail 2) only. The other fields must be left blank, otherwise the email notification

option will not be working. Event though using the DEVA account eases the set-up process, we

recommend user account to be used for sending of email notifications, , and the DEVA account for

test purposes. When using DEVA account, please note that the stable 24/7 connection depends on

the mail service provider and cannot be guaranteed.

We recommend you to use the ‘Test’ button and generate a test e-mail, which upon success will

be delivered to the specified E-mail 1 and/or E-mail 2.

Example of Test E-mail Message:

DB4005 Test Message.

Please do not reply to this e-mail.

UECP Relay

The unit can relay the received RDS as a UECP stream. There are two possible options:

Option 1

– via UDP, where the device sends the received RDS as UECP encoded UDP packets

unconditionally to the specified IP Address and Port. The receiver could be an RDS/RBDS Encoder

SmartGen, other RDS Encoder, or Monitoring Software.

Option 2

– via TCP. The unit has built in server and a Monitoring Software to receive the UECP

encoded RDS data could be connected to the unit.

USB Port

Enable/Disable the USB port.

WARNING:

The applied changes will take effect upon pressing the “Save” button. All settings

marked with require Reboot, therefore the Save & Reboot button should be used.

NOTE:

The edited field will become red if the new value is invalid or out of range.

Содержание DB4005

































































































Результаты поиска

Содержание DB4005

Отзывы:

Похожие инструкции для DB4005

Бренды по названию

Популярные бренды

DEVA Broadcast DB4005, Инструкция по техническому обслуживанию и эксплуатации

Результаты поиска

Содержание DB4005

Отзывы:

Похожие инструкции для DB4005

Бренды по названию

Популярные бренды