11
Touch and hold the
Installer Config
key to
approximately 3 seconds to enter the Thermostat
Options Configuration Menu.
Touch and hold the
Installer Config
key again for
approximately 3 seconds to enter the Advanced
Installer Configuration Menu.
7.2- FAULT STATUS
The display will change to the Fault Screen
indicating the equipment connected.
ADVANCED
will appear on the right of the display to indicate
the Advanced Installer Configuration Menu.
The equipment connected will show above the
or
keys. The scrolling message area will show
“
NO
FAULTS
” or will show a description of the
fault with an error code in the temperature display
area. Touch
or
keys to view the fault status
of each piece of equipment connected.
To change the display to the Equipment User
Menu, touch
or
.
7.3- EQUIPMENT USER MENUS
The equipment found in the system will display in
the scrolling message area.
Touch
or
to step through the list of
equipment connected, including thermostat.
To view the Equipment Menus information for the
equipment displayed in the scrolling message
area, touch
Installer Config
to enter that
equipment
submenu
listing.
The
scrolling
message area will show “
WORKING
” to indicate
that the thermostat is retrieving data. Then the first
equipment submenu name appears in the scrolling
message area.
