Dettson COND-30-01, Инструкция по установке и руководство пользователя

Страница: 1 / 53

2016-07-21 X40229 rev. E
INSTALLATION
INSTRUCTIONS AND
HOMEOWNER’S MANUAL
INSTALLER / SERVICE TECHNICIAN:
Use the information in this manual for the installation / servicing and keep the document near the furnace for future reference.
Communication wire connected between the indoor and outdoor units must be rated for at least 120VAC, they are protected by the
outdoor unit breaker and must be sized appropriately.
Do not install any metering device on the indoor coil. The expansion valve is located in the outdoor unit. If a metering device is
already installed in the indoor coil, it must be removed.
Both refrigerant lines must be separately insulated in order to avoid condensation and to ensure proper efficiency.
COND-30-01 COND-36-01
Liquid line dia (In) 1/4 1/4
Gas line dia (In) 5/8 5/8
HOMEOWNER
:
Please keep this manual near the furnace for future reference.
CAUTION
DO NOT TAMPER WITH THE UNIT OR ITS CONTROLS. CALL A QUALIFIED SERVICE TECHNICIAN.
THE WELDS MUST BE DONE BY USING NITROGEN PROTECTIVE GAS. NON-COMPLIANCE WILL MEAN THE IMMEDIATE
CANCELLATION OF THE WARRANTY.
Manufactured by :
Dettson Industries Inc.
Sherbrooke (Quebec) Canada
http://www.dettson.ca/
COND-30-01
COND-36-01
MODELS