17 TS-12Rev
- 8 -
12/9/2019
14. Reinstall the convoluted tubing and install existing elbows, tees and connector fittings. Fully
apply electrical tape around the convoluted tubing. Reference Figure 12.
Figure 12
– Tape Installation
15. Connect the 120-pin and 21-pin electrical connectors and make sure the latches are fully
closed. Connect the soot sensor electrical connector. Install new zip ties in the original
locations, securing the harness to the ATS.
Reference
Figure 13.
Figure 13
– Zip Tie Location
