17 TS-12Rev
- 5 -
12/9/2019
8. Carefully remove all convoluted tubing shown in red below.
Reference
Figure 6.
Figure 6
– Convoluted Tubing Removal
9.
I
nspect all exposed wires for damage or corrosion, looking carefully for wire insulation that
has worn through, exposing the wire core. Is there exposed wire core?
Reference
Figure 7.
a. Yes; replace the ATS harness. Reference the removal and installation sections for the 1-
BOX™ Aftertreatment Harness in the
GHG17 Heavy Duty Workshop Manual
(DDC-SVC-
MAN-0190). Instructions for adding anti-chaffing tape are further below. Go to step 11.
b. No; go to step 10.
No wire core exposure
Wire core exposure-
REPLACE
harness
Figure 7
– Wire Harness Inspection
