DSE F501-300 (Rev 06/28/19)
Page 8 of 15
Figure 13
–
Install Connectors to LED Dimmer
18.
Ensure that you are connecting the “LED” side of the dimmer to the original wires.
This is
indicated on the label of the dimmer. Insert the LED wires to the LED dimmer connectors
paying close attention to the wire colors. The black wire on the LED should connect to the
black wire on the dimmer and the red wire on the LED should connect to the red wire on the
dimmer (Figure 14).
NOTE:
Instead of using the connectors, you may solder and heat shrink
the wires together. Wiring the LED or dimmer backwards will not cause any damage. The
components simply will not work properly.
Figure 14
–
Connect LED to Dimmer
