background image

DETROIT RADIANT PRODUCTS COMPANY

21400 HOOVER ROAD  -  WARREN, MI 

DETROIT RADIANT PRODUCTS - RADIANT HEATER

PORTABLE INFRARED CONSTRUCTION HEATER
FOR INDOOR (NON-DOMESTIC) INSTALLATION ONLY

(586) 756-0950

-       www.drp-co.com

INPUT BTU/H:

16,000

DESIGN COMPLIES WITH:

ANSI Z83.7-2000-GAS FIRED CONSTRUCTION

MANIFOLD PRESSURE:

11.0 Inches W.C.

Serial No.:

  0807 DETR 21400   0001

MODEL NO.

P - 32T

GAS INLET PRESSURE TO REGULATOR:

Minimum:  12.0 Inches W.C.
Maximum:  350 PSI

FOR USE WITH PROPANE GAS

MINIMUM CLEARANCES FROM COMBUSTIBLE 

MATERIAL AND FUEL CONTAINERS

 

SIDES       REAR       CEILING      DISCHARGE

 

24 In.    18 In.     48 In.        72 In.  

 

!

4

5

PT 

Series

1.0

 Safety

 

 Clearance to Combustibles 

  Safety Signs and Labels

Chart 1.1

 •

 Clearance to Combustibles (in Inches)

Back

Figure 1.1 

 Clearance to Combustibles

Model No.

Sides

Back

Top

Front

P-16T

18

18

48

48

P-32T

24

18

48

72

Side

Top

Front

FRONT VIEW

SIDE VIEW

Safety Signs and Labels

Safety warning labels must be maintained on the infrared heater. Illustrations of the safety labels, and their 
locations, are pictured below.

Safety Label F/N: LLPCL001

Rating Plate

BACK VIEW

SA

MP

LE

Side

DETROIT RADIANT PRODUCTS COMPANY

21400 HOOVER ROAD  -  WARREN, MI 

DETROIT RADIANT PRODUCTS - RADIANT HEATER

PORTABLE INFRARED CONSTRUCTION HEATER
FOR INDOOR (NON-DOMESTIC) INSTALLATION ONLY

(586) 756-0950

-       www.drp-co.com

INPUT BTU/H:

16,000

DESIGN COMPLIES WITH:

ANSI Z83.7-2000-GAS FIRED CONSTRUCTION

MANIFOLD PRESSURE:

11.0 Inches W.C.

Serial No.:

  0807 DETR 21400   0001

MODEL NO.

P - 32T

GAS INLET PRESSURE TO REGULATOR:

Minimum:  12.0 Inches W.C.
Maximum:  350 PSI

FOR USE WITH PROPANE GAS

MINIMUM CLEARANCES FROM COMBUSTIBLE 

MATERIAL AND FUEL CONTAINERS

 

SIDES       REAR       CEILING      DISCHARGE

 

24 In.    18 In.     48 In.        72 In.   

!

Содержание P-16T













Отзывы: