background image

WARNING

!

!

For Your Safety

Propane gas is VERY FLAMMABLE! It is scented and its strong odor is readily detectable. In the event of a leak, 
propane will accumulate and the possibility of a fire is present.

 If you smell gas:

•  Never strike a match, create a flame, or create an electric spark.
•  Move the heater outside and ventilate the area thoroughly. 
•  Find and correct the source of the leak before attempting to light the heater. If the leak cannot be  corrected, do    
  not tamper with the heater. 
•  Turn the heater “OFF” and consult the manufacturer, a qualified installer, or the gas supplier.

Failure to comply with the precautions and instructions provided with this heater can 
result in death, serious bodily injury, and property loss or damage from hazards of fire, 
explosion, burns, asphyxiation, carbon monoxide poisoning, and/or electrical shock.
Only persons who can understand and follow the instructions should use or service 
this heater. If you need assistance or heater information such as an instruction manual, 
label, etc. contact the manufacturer.
Fire, burn, inhalation, and explosion hazard. Keep combustibles such as building 
materials, paper, or cardboard a safe distance away from the heater as recommended 
by the instructions. Never use the heater in spaces which do or may contain volatile or 
airborne combustibles or products such as gasoline, solvents, paint thinner, dust 
particles, or unknown chemicals.
This heater is 

not approved for use in

 

any indoor residential application

. This 

includes, but is not limited to, attached garages, solarium, living quarters, mobile 
homes, campers, tents, recreational vehicles, etc.

PT Series 

Manual

Detroit Radiant Products Co. 

Installation, 

Operation, 

Maintenance, 

and Parts

Important!

 The LP gas heater is designed and 

approved for use as a construction heater in 
accordance with the ANSI Z83.7a-2007 Standard. 
Other standards govern the use of fuel gases and 
heat producing products in specific applications. 
Check with local authorities if you have questions or 
need advice about applications.

Models P-16T & P-32T

LIOPT-Rev. 29110

Print: LIOPT-1M-11/16_r1-01/17 (WHI)

Replaces: LIOPT-3M-01/14 (CDS)

INSTALLER: Present this manual to the end user.

Keep these instructions in a clean and dry place for future reference.

Model#:

 ___________________

Serial #:

 _________________________

(located on rating label)

Содержание P-16T













Отзывы: