manualshive.com logo in svg

Detroit Radiant Products LS-10-25, Руководство по установке

Устанавливайте и используйте Detroit Radiant Products LS-10-25 с легкостью, обращаясь к установочному руководству. Скачайте бесплатное руководство с нашего сайта, чтобы узнать, как настроить обогреватель для оптимальной эффективности. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

WARNING

!

!

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death. Read the installation, operation and maintenance 
instructions thoroughly before installing or servicing this equipment. 
This heater 

must

 be installed and serviced by trained gas installation and service 

personnel only.  Failure to comply could result in personal injury, asphyxiation, death, 
fire or property damage. 

Do not

 store or use gasoline or other flammable vapors and liquids in the vicinity of 

this or any other appliance.
In locations used for the storage of combustible materials, signs 

must

 be posted to 

specify the maximum permissible stacking height to maintain the required clearances 
from the heater to the combustibles. Signs must either be posted adjacent to the 
heater thermostats or in the absence of such thermostats, in a conspicuous location.

Do not use this heater in indoor living or sleeping quarters, ect.!

 

 

Installation of 

a tube heater system in residential indoor living spaces may result in property damage, 
serious injury, asphyxiation or death.  

LS Series 

Installation Manual

The LS Series Infra-Red Tube Heater is a positive pressure, single stage radiant heater system. This 
manual provides specific information related to the LS Series model. All persons involved with the 
installation, operation and maintenance of the heater system must read and understand the information 
in this manual.

For Your Safety

If you smell gas:

 

•  Do not try to light any appliance.  

• Immediately call your gas supplier from a neighbor’s phone.

•  Do not touch any electrical switch. 

• Follow the gas supplier’s instructions. 

•  Do not use any phone in your building.   • If you cannot reach your gas supplier, call the fire department.
 

Keep these instructions for future reference.

F/N: LIOLS-1M-4/08 (CDS)

Replaces F/N: LIOLS-3/05

Содержание LS-10-25

















































Отзывы:

Нет отзывов

Похожие инструкции для LS-10-25

Jandy LX Installation And Operation Manual preview
LX
Бренд: Jandy Страницы: 52
Goldair Platinum GHOR900 Manual preview
Platinum GHOR900
Бренд: Goldair Страницы: 16
Zelmer 37z011-001 User Manual preview
37z011-001
Бренд: Zelmer Страницы: 80
Pinnacle Climate Technologies REMINGTON REM-16-TTC-O User'S Manual & Operating Instructions preview
REMINGTON REM-16-TTC-O
Бренд: Pinnacle Climate Technologies Страницы: 32
True North TN19 Installation And Operating Instructions Manual preview
TN19
Бренд: True North Страницы: 20
Mepu thermox K110-2 User Manual preview
thermox K110-2
Бренд: Mepu Страницы: 28
Scarlett SC-151 Instruction Manual preview
SC-151
Бренд: Scarlett Страницы: 14
lifeSMART LCHT1040US Manual preview
LCHT1040US
Бренд: lifeSMART Страницы: 16
DCG SA9660N Instruction Manual preview
SA9660N
Бренд: DCG Страницы: 12
wallas 30 GB Manual preview
30 GB
Бренд: wallas Страницы: 38
Enviro 6G50100 series Instruction Manual preview
6G50100 series
Бренд: Enviro Страницы: 112
Versonel VSL1500H6E Owners Manual And Set-Up Manual preview
VSL1500H6E
Бренд: Versonel Страницы: 12
VEAB CWW Manual preview
CWW
Бренд: VEAB Страницы: 10
Brant Radiant Heaters QTD Series User Instruction preview
QTD Series
Бренд: Brant Radiant Heaters Страницы: 44
Sonnenkonig 21222292 Instruction Manual preview
21222292
Бренд: Sonnenkonig Страницы: 48
Dimplex RD 1007 TS Installation And Operating Instructions Manual preview
RD 1007 TS
Бренд: Dimplex Страницы: 28
Sawo PHOENIX PNX6-90Ni2 Manual preview
PHOENIX PNX6-90Ni2
Бренд: Sawo Страницы: 34
Master MH-135T-KFA User'S Manual And Operating Instructions preview
MH-135T-KFA
Бренд: Master Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды