8
DSCS-9/10
Series
1.0
Safety
•
Standards, Certifications, and Government Regulations
Electrical:
Under no circumstances is the electrical supply line to provide any assistance in the suspension of the
heater.
Notwithstanding their limited scope, this appliance must be installed in accordance with the relevant
provisions of the following regulations:
United Kingdom
Gas Safety (Installation and Use) Regulations 1984 and BS 6896:2005. Due account should be taken of
any obligations arising from the Health and Safety at Work etc Act 1974, the current Building Regulations,
the current I.E.E. Regulations, and other relevant codes of practice.
Ireland
I.S. 3212:1987, ICP 4, I.S. 327. Due account should be taken of any obligations arising from the current
Building Regulations, the current I.E.E. Regulations, and other relevant codes of practice.
Flueing:
This heater must be installed in accordance with the requirements set forth in this manual and with all
applicable local, state, and national specifications, regulations, and building codes. See flue requirements
on page 21.
