34
Making External/Internal Calls
Making Calls
(*: Not possible if there are already
two active connections.)
Note:
If a called subscriber is a
member of an - additional - pickup
group for which pickup protection
(
Prevent Pickup
) is active, then you
cannot pick up calls to his number.
Pick-up select
*: You accept the
call from any other telephone by en-
tering the number of that telephone.
If the other telephone is already in
the call state (e.g. an answering ma-
chine is in announcement mode),
pick-up will no longer be possible.
(*: Not possible if there are already
two active connections.)
Note:
If a called subscriber is a
member of a user group for which
pickup protection (
Prevent Pickup
)
is active, then you cannot selectively
pick up calls to his number.
Hold
: You put the call on hold.
Door opener
: You activate the
door opener.
Notes
: You can note a telephone
number during a call. Under
Destination
, enter the number
and a
Text
, if required, and
Save
!
the number. You can call the number
with
Dial
.
Catch call
: The telephone num-
bers of malicious callers can be
saved in your network operator’s ex-
change (if this service is enabled).
The function is also possible if the
caller has already hung up!
MenuCard “Busy”
Press (but do not hold down) the
MenuCard key
, then select
…
Callback
: You leave your wish to
be called back with a busy internal
user (not possible for hunt group
numbers).
Pick-up select
*: You accept the
call from any other telephone by en-
tering the number of that telephone.
If the other telephone is already in
the call state (e.g. an answering ma-
chine is in announcement mode),
you pick up the call. (*: Not possible
if there are already two active con-
nections.)
Note:
If a called subscriber is a
member of a user group for which
pickup protection (
Prevent Pickup
)
is active, then you cannot selectively
pick up calls to his number.
VIP call
*: Your call is acoustically
signalled to called internal users,
even if they have activated their call-
waiting protection, call-protection
or call-diversion function (only pos-
sible on system telephones).
(*: Not possible if there are already
two active connections.)
op6365_gb.book Seite 34 Mittwoch, 28. August 2002 11:09 11
