Detecto WPB Series Скачать руководство пользователя страница 15

Страница: 15 / 24

8525-0380-0M Rev B

WPB Series Owner’s Manual

CHECK WEIGHING, CONT.

set-Li

(SET Li) – Set the Check Weighing Functions

With the display showing

set-Li

(SET Li), press the

key.

The display will change to show

(LiM-Hi).

If the current setting is acceptable, press the

key to save it and proceed to

(LiM-Ck)

If the current setting is not acceptable, press the

key repeatedly to step through

selections and select a new setting, and

then press the

key to save it and

proceed to

(LiM-Ck)

Allowable settings for the check weighing functions are:

(LiM-Hi)

If the weight on the scale is greater than the upper limit setting,
the

LED will turn on and the beeper will sound.

@!6

(LiM-Lo)

If the weight on the scale is lower than the lower limit setting,
the

LED will turn on and the beeper will sound.

@-0

(LiM-in)

If the weight on the scale is greater than the lower limit setting
and less than the upper limit, the

LED will turn on and the

beeper will sound.

@'0

(LiM-Un)

If the weight on the scale is lower than the lower limit setting,
the

LED will turn on and the beeper will sound.

Or
If the weight on the scale is greater than the upper limit setting,
the

LED will turn on and the beeper will sound.

(LiM-Ck) – Enable or Disable stable weight requirement for Check Weighing

With the display showing

(LiM-Ck), press the

key.

The display will change to show

(LiM-St).

If the current setting is acceptable, press the

key to save it and proceed to

(LiM-BZ).

If the current setting is not acceptable, press the

key to toggle the selection, and

then press the

key to save it and proceed to

(LiM-BZ).

Allowable settings for check weighing stable weight requirement are:

(LiM-St)

Check Weighing requires stable weight.

(LiM-US)

Check Weighing does not require stable weight.

Содержание WPB Series

























Результаты поиска

Содержание WPB Series

Отзывы:

Бренды по названию

Популярные бренды

Detecto WPB Series, Руководство пользователя

Результаты поиска

Содержание WPB Series

Отзывы:

Бренды по названию

Популярные бренды