14
operation
Having the correct feeding ga adjusted will ensure a smooth counting as well
as a trouble-free operation. Trial and error attempts are recommended before
you make the final adjustment.
•
When the hopper is too tight, please loosen it by toggling the wheel to
“
-
”.
It
works for used (thicker) notes
and Polymer notes to increase the gap
•
When the hopper is too loose, please tighten it by toggling the wheel to
“
+
”
. It
works for new (thinner) notes and Polymer notes to reduce the gap
•
We advise to keep it to Neutral mode
(as per picture below with the
Screw-
head in the middle of the wheel gap.
After
-
which
small ad
j
ustment
s
toward
“+”
direction works best
F.
Removing Jammed Notes
When notes are stuck in the machine, please open the machine from the back and
remove the notes. Once the stuck notes are removed, press start to resume the
count
