Det-Tronics GT3000 Series, Инструкция по эксплуатации

Страница: 17 / 33

15
12.4 95-8616
DEVICE REPAIR AND RETURN
Prior to returning devices, a Return Materials
Authorization (RMA) number must be obtained. The
process for obtaining this number can be found here
(www.det-tronics.com/Products/repair-and-warranty-
services). You may also contact your authorized local
sales representative or Det-Tronics Technical Support
for assistance:
+1 800.765.3473, ext.3
+1 952.941.5665
M-F, 8 AM - 5 PM, Central Prevailing Time, US
RMA@Det-Tronics.com
Pack the unit properly. Always use sufficient packing
material. Where applicable, use an antistatic bag as
protection from electrostatic discharge.
NOTE
Inadequate packaging that ultimately causes
damage to the returned device during shipment
will result in a service charge to repair the damage
incurred during shipment.
Return all equipment transportation prepaid to the
factory in Minneapolis.
NOTE
It is highly recommended that a complete spare
be kept on hand for field replacement to ensure
continuous protection.
ORDERING INFORMATION
Sensor module (GTS) and transmitter (GTX) must be
ordered separately. Refer to the Transmitter and Sensor
Model Matrix on next page for ordering details.
GTS GAS SENSORS
Gas Concentration
Hydrogen Sulfide (H
2
S) 0-20 ppm
Hydrogen Sulfide (H
2
S) 0-50 ppm
Hydrogen Sulfide (H
2
S) 0-100 ppm
Oxygen (O
2
)* 1-25% V/V
Carbon Monoxide (CO) 0-100 ppm
Carbon Monoxide (CO) 0-500 ppm
Ammonia (NH
3
) 0-100, or 0-500 ppm
Sulfur Dioxide (SO
2
) 0-20 ppm
Sulfur Dioxide (SO
2
) 0-100 ppm
Chlorine (Cl
2
) 0-10 ppm
Hydrogen (H
2
) 0-1000 ppm
Nitrogen Dioxide (NO
2
) 0-20 ppm
*Oxygen detector for O
2
depletion (< 21% V/V) only.
Oxygen sensor will indicate a fault if <1% volume
oxygen is detected.
CALIBRATION KITS FOR GAS SENSORS
Part Number
Gas / Concentration
010274-001 H
2
S / 10 ppm
010274-002 H
2
S / 25 ppm
010274-003 H
2
S / 50 ppm
010274-008 H
2
/ 500 ppm
010274-009 O
2
/ 20.9%
010274-010 CO / 50 ppm
010274-011 CO / 250 ppm
010274-005 NH
3
/ 50 ppm
010274-006 NH
3
/ 250 ppm
010274-013 SO
2
/ 10 ppm
010274-014 SO
2
/ 50 ppm
010274-004 Cl
2
/ 5 ppm
010274-016 NO
2
/ 10 ppm
Replacement gas cylinders for all calibration kits are
available.
PARTS & ACCESSORIES
Part Number Description
009700-001 Magnetic Tool
009737-001 Calibration Cup
107427-059 Calibration Cup O-ring
101678-007 3 Foot Tubing
162552-001 Regulator, 1 LPM
009640-001 Replacement Filter
012509-001 Q312 Sample Draw without Fittings
012509-002 Q312 Sample Draw with Fittings
010780-003 GT3000 Remote Calibration Adaptor
010783-001 GT3000 Remote Calibration Filter
012513-XXX* Q912 Duct Mount Enclosure, M25
012514-XXX* Q912 Duct Mount Enclosure, 3/4"
*Refer to the Product Catalog for a list of options.