Desoutter 6151659610, Инструкция по эксплуатации продукта

Страница: 16 / 24

Service EN
16 / 24 06/2020
Service
Firmware version on tool display
The firmware version of the tool is displayed in the menu "Maintenance/Tool".
AX.YY.ZZ.
Tool information from tool display
Go to "Maintenance/Tool" menu to get the following information:
Total counter Number of tightenings since the manufacturing of the tool.
Battery The current voltage value is displayed.
The "Low battery" message is displayed when lower than 32
V.
At 31 V, the tool stops.
Serial number 18B64685 for example.
Tool test with CVIMONITOR
Click this icon.
Click Tool test .
Click Start tool test .
LEDs start blinking.
Press the triggers, the reverse button.
Click Start audio test .
The tool emits a sound.
The green tick displayed indicates the function is working properly.
Tool identification with CVIMONITOR
Click this icon.
Click Tool identification .
Go to the bottom of the screen and click Read tool.
A green tick indicates the reading is successful.
Maintenance Instructions
Read before maintenance
WARNING Connection Hazard
The tool can start unexpectedly and cause severe bodily injury.
►
Prior to any maintenance task, disconnect the tool.
Maintenance should be performed by qualified personnel only .
Follow standard engineering practices and refer to exploded views for disassembling and reassembling the different
parts of the system.
Take into account the following instructions given in the exploded views.
Be cautious: when reassembling, tighten the right direction.
Left hand thread