This Manual is applicable to Soft LED8
Revised on August 2018
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
DEFAULT SETTINGS ARE INDICATED IN BOLD LETTERS ON THE FOLLOWING TABLE:
The following are the BASIC FUNCTIONS and COMMANDS that are provided on the LOCAL MENU of the LED FRESNEL. The unit is provided with a USER
MENU accessible instantly on the product.
DMX ADDRESS
This Function is to SET the
DMX address
from
1
to 512
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the
DMX addr Menu, select the preferred base DMX Address and
Select it.
Once the DMX Address is SET, in order to return to the MAIN
MENU, it is necessary to rotate KNOB 2 counter-clock-wise to
return to the EXIT item and then select it by pressing KNOB 2
itself.
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the DMX addr Menu,
select the preferred base DMX Address and Select it.
1st menu displayed
2nd menu displayed
Explanation of each menu function
CHANNEL SETTING (RESOLUTION & FUNCTION)
This function is to SET THE DIMMING RESOLUTION either at 8 bits or at 16 bits.
Select DMX resol by rotating and pushing KNOB2, the following choices are available:
- 8 bits resolution (the display will show 8 bit). The fixture utilizes 1 DMX Circuit for the
Light Dimming, which is the BASE CIRCUIT set in the ADDRESS.
- 16 bits: 16 bits resolution (the disply will show 16 bit and this is the default setting).
The fixture utilizes 2 DMX Circuits:
The Base Circuit set in the address is the Coarse Dimming, the second Circuit (Base +1)
is the Fine Dimming.
Of course the benefit of the 16 bits function the corresponding circuits on the DMX
Lighting Board shall also beset at 16 bits.
LOCAL DIMMING CONTROL
This function is to LOCALLY DIM THE LED INTENSITY from 0 to 100% (Product is
delivered with default setting of the Dimmer at 0)
he right knob is doing the dimming action and it goes with a fine tuning in normal
condition, or a fast dimming when rotating KNOB 2 while keeping KNOB 1 pressed
in.
