This Manual is applicable to
Revised August 2018
SOFT LED 8
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
8.
DIMENSIONS
9.
PERIODIC INSPECTION & MAINTENANCE
This product requires very little routine maintenance, if any, but has special cleaning instructions:
Disconnect fixture from power and allow it to cool for 10 min.
1.
Vacuum or gently blow away any dust from fan blades and grills
2.
Very gently clean the LED with Isopropyl alcohol.
3.
Clean the Phosphors Panel with a soft damp cloth.
4.
Check the condition of the safety shield (see chapter: Installation Instructions) before every use.
5.
Check Power supply cable and DMX control cable proper conditions
10.
SAFETY STANDARDS
Europe: The product conforms the Applicable European Directives & Standards
Ü
Low Voltage Directive: 73/23/EEC (as amended by 93/68/EEC)
Ü
EMC Directive: 89/336/EEC (as amended by 92/31/EEC & by 93/68/EEC)
Ü
Europen Standards:: EN 60598-2-17, EN 60598-1 , EN 55015 , EN 61547
Disposing of this product:
Help preserve the environment! Ensure that this product is recycled at the end of its life.
This product is in compliance with the RoHS and WEEE directives.
Dimensions: Black=mm.
Red=inches
Dimensions: Black=mm.
Red=inches
