9
Figure 19
Figure 18
12. FAN WITHOUT LIGHT
KIT
(OPTIONAL)
Your fan is designed with light kit, we
also prepare a empty switch box for
your choice in case you intend to install
the fan without light kit. Proceed the
followings for switch box assembly:
1. Disassemble the wire harness from
the light fixture by loosing the two
plug-in wire connectors, you can
keep the light fixture for future use.
2. Install the wire harness into the
empty switch box by placing the
r e v e r s e m o d u l e a n d c a p a c i t o r
inside the empty switch box with
self adhesive tape. (Fig. 18)
3. Tuck the wire harness into the switch
box.
4. Remove the screws from the mounting
plate under the fan motor. Raise the
switch box to the mounting plate until
the holes in switch box and mounting
plate line up. Reinsert the screws to
secure in place. (Fig. 19)
Screws
Mounting plate
Wire connection
plugs
Switch housing
P l u g - i n
w i r e c o n n e c t o r
C a p a c i t o r
R e v e r s e M o d u l e
Wire harness
empty
switch box
