8
Figure 16
Figure 17
10. INSTALLING THE
LIGHT KIT
NOTE: B e f o r e s t a r t i n g i n s t a l l a t i o n ,
disconnect the power by turning off
the circuit breaker or removing the
fuse at fuse box. Turning power off
using the fan switch is not sufficient to
prevent electric shock.
1. While holding the light kit assembly
under your fan, snap together the
wire connection plugs .
2. Carefully push all wires back into the
switch housing, then install the light
k i t a s s e m b l y o n t o t h e m o u n t i n g
plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 16)
11. INSTALLING THE
LIGHT BULBS & GLASS
SHADES
1. Remove the lock ring from the socket
by turning the lock ring counter-
clockwise Until it unlocks. Insert the
glass into the glass holder and turn
the lock ring clockwise to tighten the
glass. Repeat for the remaining glass.
(Fig. 17)
2. Install 4 x 60W candelabra bulbs (not
included). (Fig. 17)
3. Restore power and your light kit is
ready for operation.
Bulbs
Glass shade
Lock ring
Connection plugs
Light kit
assembly
Screws
Mounting
plate
