manualshive.com logo in svg

Design Analysis H-350XL, Руководство пользователя

Владельцы Design Analysis H-350XL могут бесплатно загрузить Руководство пользователя на нашем сайте. Этот мануал поможет вам освоить все функции и особенности этого продукта. Не забудьте скачать его с manualshive.com, чтобы быть в курсе всех возможностей вашего устройства.

Поделиться
Скачать
background image

XL™ Series

Data Card Options 20-7

external data files.  Once the desired memory location has been selected, a list of files for that
location will be displayed with an arrow pointing to the first file.  Use the UP and DOWN arrow
keys to select a file to delete and then press the ENTER key to actually delete the file.  Press the
ESC key to abort this process.  If the internal data memory is selected and scanning is on then the
system will not allow files to be erased.

   PC Interface View                                                                               Built In Display Screen   

F - Erase Individual Files

Erase Card File?

This is just like the option to erase internal data listed above except it is working with the
external data card.  This option works a little differently when using the built in menu verses the
PC menu interface. 

Using the built in menu, pressing the ENTER key will cause a list of internal files to be viewed
starting with the first file on the external data card.  To view the other files press the UP and
DOWN keys to scroll through the files. When a file is displayed the is to be erased, press the
ENTER key and the listed file will be erased.  

Note

; o

nce erased the data file cannot be

retrieved.

 This option can be used while scanning is enabled.

Using the PC menu a message is displayed allowing the user to select the internal data files or the
external data files.  Once the desired memory location has been selected, a list of files for that
location will be displayed with an arrow pointing to the first file.  Use the UP and DOWN arrow
keys to select a file to delete and then press the ENTER key to actually delete the file.  Press the
ESC key to abort this process.  If the internal data memory is selected and scanning is on then the
system will not allow files to be erased.

   PC Interface View                                                                               Built In Display Screen   

See Notes Below

Calc DataBytes Free?

This option is indirectly available from the PC menu.  See the note below.  From the built in
menu, pressing the ENTER key will cause the system to calculate the number of bytes free and
available for data storage on the internal data card. This option may take several seconds to
complete depending on the size of internal memory card in use.  In most cases this should not be
an issue as the internal data card is large enough to store several years of data for the simpler
applications . The following gives an example of how to determine memory usage:  

Suppose 4 megabyte memory space is used to store the data. Also the data to be stored is the
date, time, stage, temperature, rain, and battery voltage at 15 minute intervals. One line of data
would look like the following:

Содержание H-350XL

















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для H-350XL

SIAP+MICROS e015a DA15K User Manual preview
e015a DA15K
Бренд: SIAP+MICROS Страницы: 28
Sony SCX-16W Instruction Manual preview
SCX-16W
Бренд: Sony Страницы: 300
Observator Instruments OMC-042 User Manual preview
OMC-042
Бренд: Observator Instruments Страницы: 106
Onset HOBO User Manual preview
HOBO
Бренд: Onset Страницы: 8
PST MADGE TECH MicroRHTemp Product User Manual preview
MADGE TECH MicroRHTemp
Бренд: PST Страницы: 4
Eletech LogMaster-800 User Manual preview
LogMaster-800
Бренд: Eletech Страницы: 25
Acksen DC-3V-RS User Instructions preview
DC-3V-RS
Бренд: Acksen Страницы: 2
Campbell CR310 Getting Started Manual preview
CR310
Бренд: Campbell Страницы: 15
Calypso Instruments ULTRASONIC Portable User Manual preview
ULTRASONIC Portable
Бренд: Calypso Instruments Страницы: 13
Omega Engineering OMB-NETSCAN 1500 User Manual preview
OMB-NETSCAN 1500
Бренд: Omega Engineering Страницы: 256
PASCO SPARK LXi2 Product Manual preview
SPARK LXi2
Бренд: PASCO Страницы: 3
TAG Heuer Chrono Split HL 640 Simplified User Manual preview
Chrono Split HL 640
Бренд: TAG Heuer Страницы: 13
Stoneridge digipostpro Administrative Manual preview
digipostpro
Бренд: Stoneridge Страницы: 26
Stoneridge Veeder-Root 2400 Series User Manual preview
Veeder-Root 2400 Series
Бренд: Stoneridge Страницы: 28
RST Instruments RSTAR Affinity Gateway Installation Manual preview
RSTAR Affinity Gateway
Бренд: RST Instruments Страницы: 24
RST Instruments RST Flexi-Mux Instruction Manual preview
RST Flexi-Mux
Бренд: RST Instruments Страницы: 28
Peak IPEH-002220 User Manual preview
IPEH-002220
Бренд: Peak Страницы: 64
Onset U9-001 State Manual preview
U9-001 State
Бренд: Onset Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды