![background image](http://html1.mh-extra.com/html/design-2000/astro-25-dt-5365-series/astro-25-dt-5365-series_installation-and-service-handbook_2486784006.webp)
DRAFT 2.0 – COMMERCIAL IN CONFIDENCE
FST DT-5365 Series Installation & Service Manual T/18237 Draft 2.0 Page 6 February 2018
1
FUNCTIONAL
DESCRIPTION
Figure
1:
DT-5365
Front
Figure
2:
DT-5365
Rear
1.1
GENERAL FEATURES
The Victorian SES Fixed Station Terminal is a desktop APX2500, APX4500, APX6500, APX7500, or APX
8500 Mobile Radio Console for use in an office environment or temporary location.
The Fixed Station Terminal is powered by the Standard VIC SES Radio Power Supply arrangement.
The DT-5365 has the capability to:
Operate from a 12V d.c. nominal Supply and/or Rechargeable battery
Power an external 5W nom., 4-8 Ohm passive PA speaker (volume control knob on front)
Provide an E&M interface for an external mic/spkr or CCGW (Tx/Rx) arrangement
Interface an external desk microphone or
Interface an external wireless microphone
Interface an external lightweight headset/microphone or
Interface an external earphone (Smartphone style earbuds/mic)
Interface an external PTT foot pedal
Drive a main speaker (volume control knob on front)
These interfaces meet telecommunications network connection safety and level requirements (AS/NZS
60950 and ACMA TS 006 Clause 5.2.2 (a)). The Fixed Station Terminal Interface audio break-outs are
buffered to allow operation of all facilities simultaneously. Preset volume controls for the E&M Interface are
accessible via recessed, screwdriver adjustable, controls located on the rear panel. Receive volume for
the earphone/headset, main speaker and extension speaker are controlled by the knobs on the front panel
of the Operator Control Panel Box.