DRAFT 2.0 – COMMERCIAL IN CONFIDENCE
FST DT-5365 Series Installation & Service Manual T/18237 Draft 2.0 Page 21 February 2018
3.11
POWER INPUT
This is the power input sourced from the VIC SES standard Power
Supply Arrangement.
Pin Number Description
Level / Sensitivity
1 -ve
Return Return
2
+12V d.c. nom.
Power
3.12
ETHERNET CONTROLLER PORT (OPTIONAL)
RJ45 MagJack
The Ethernet jack is an IP Interface that provides an internal Web page (or Home page) for the
configuration of the DT-5365.
Also on the web page, on a per application basis, custom buttons can be made available to send, say, a
Status message across the P25 radio network to another radio. The construction of custom buttons is not
made available to any third party and is subject to an APX ADK License Agreement on a per project basis.
As another example, the DT-5365’s IP Interface could regularly check an email account (SMTP) for mail
containing a phrase or password in the title, then take action based on the body text of that email (eg.
"ALERT RADIO 1234").
Pin Number Description
Level / Sensitivity
1
Transmit Data
TXD+
2 Transmit
Data
TXD-
3 Receive
Data
RXD+
4
5
6 Receive
Data
RXD-
7
8
Network Connection
Connect the DT-5365’s Ethernet jack to a spare LAN port on the Router or Switch using a standard CAT5,
CAT5e or CAT6 network patch cable. Wait a minute or so for the Router to lease an IP address to the DT-
5365 which defaults to DHCP. Open your Browser and type the DT-5365’s serial number (it’s on the back
of the DT-5365) into the address bar, eg. http://RS52701337/ (include the RS and / ):
