DESi Utopic R, Руководство пользователя

Страница: 5 / 56

5
In some security doors, even if you remove cylinder screw, you cannot remove cylinder due to cramped installation of
cylinder defender.
Follow the instructions below, for that kind of situations:
- Untighten screws of cylinder defender (don’t remove the screws)
- Remove cylinder screw and take out the old cylinder.
- Disassemble the motozied part from the cylinder.
- Install the cylinder part to the door and tighten the cylinder screw.
- Tighten the screws of cylinder defender.
- Assemble the motorized part with cylinder.
DETACHING / ATTACHING MOTOR AND
CYLINDER
Loosen the set screw
with hex key out of the
box. Pull the motor part out.
To attach two parts, push the motor
properly in to cylinder and tighten
the set screw.
Set Screw
The first controller enrolled to motorized cylinder is accepted as master
controller. The rest of controller will be user controllers.
3. MASTER CONTROLLER AND USER CONTROLLERS
Both, master and user controllers can be used to lock/unlock the motorized cylinder but only the master controller can
change settings of motorized cylinder.
If your device’s master controller is “Wireless Fingerprint Reader V1” jump to page 6.
If your device’s master controller is “Wireless Fingerprint Reader V2” jump to page 26.
If your device’s master controller is “Smart Phone” jump to page 46.