DESi Utopic R, Руководство пользователя

Страница: 22 / 56

22
4.3.13. ADJUSTING LATCH RETRACTION PERIOD (HT)
According to type of your lock and usage, you would need to adjust the time period which the motorized cylinder will keep
latch of the lock inside when it unlocks the lock. To adjust latch retraction period, follows the steps below:
- Touch “WAKE UP”. Two arrows will appear on display. Than touch “2”. “AD” will be shown.
- Put one of the master fingers to the reader. First “OK” and than “LR” will be shown.
- Touch to “2" till “HT” appears and touch to “1" when “HT” is on display. ”H0",“H1", “H2" or “H3" will be shown.
- Touch to “1" to toggle between;
“H0” - No Latch (choose if the lock doesn’t have a latch)
“H1” - Short Period (latch will be kept inside the lock around 1 second and than released)
“H2” - Middle Period (latch will be kept inside the lock around 5 second and than released)
“H3” - Long Period (latch will be kept inside the lock around 9 second and than released)
- When desired choice is displayed, touch to “2". “OK” will be displayed.
In this way, latch retraction period of motorized cylinder will be adjusted. Schematic representation of adjusting latch
retraction period of 5 seconds is as follows:
N OTE : To transfer settings to motorized cylinder, you need to lock or unlock motorized cylinder via master controller.