DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website:
TB-8003
Page 2 of 5
© 2021 DESCO INDUSTRIES INC
Employee Owned
Features and Components
A. Emitter Point Cleaner Knob:
Remove the cap
to expose the balance offset voltage adjustment
potentiometer. Turn the potentiometer clockwise
for positive adjustment. Turn the potentiometer
counter-clockwise for negative adjustment.
B. Tilt Lock Knob:
Loosen and tighten the two knobs to
tilt the ionizer and alter its direction of airflow.
C. Heater Switch:
Toggle the switch up to turn the
heater ON. Toggle the switch down to turn the heater
OFF.
D. Power Switch:
Toggle the switch up to turn the
ionizer ON. Toggle the switch down to turn the ionizer
OFF.
E. Fan Speed Switch:
Toggle the switch up to set the
fan speed to HIGH. Toggle the switch down to set the
fan speed to LOW.
F. Snap-on Filter Retainer:
Use the snap-on retainer
to install the filter onto the air-intake grill at the back of
the ionizer.
G. Power Inlet:
Connect the power cord here.
H. Fuseholder:
Stores the 5 A slow-blow fuse for
powering the ionizer.
I. Ground Terminal:
For best performance, the
blower chassis-ground terminal and all worksurfaces in
proximity to the target (i.e. wokbench, ESD mat) should
always be wired to a reliably earthed electrical point.
Installation
Place the unit at a desired location where the airflow
will not be restricted. Use the tilt lock knobs to aim the
ionizer at the area to be neutralized. Ensure that the
power switch is set to OFF. Connect the ionizer’s power
cord into an appropriate AC power source.
Operation
1. Position the ionizer so that maximum airflow is
directed towards the items or area to be neutralized.
2. Turn the unit ON. The power LED will illuminate and
remain solid.
3. Set the fan speed switch to the desired setting.
Higher airflow will result in faster discharge times.
4. Use the heater switch as desired to enable the
heater for operator comfort.
Figure 3. Using the Trustat® Benchtop Ionizer at a
workstation
Figure 2. Trustat® Benchtop Ionizer features and
components
A
C
D
E
F
G
H
B
I
