TB-3040
Page 4 of 6
© 2009 DESCO INDUSTRIES, INC.
Employee Owned
Specifications
Measurement Range (switch selectable)
Low Range:
0 to ±1.99 kV / inch
High Range:
0 to ±19.99 kV / inch
Measurement Accuracy
Voltage Monitor Output: > ±5% of reading ±10 mV
Voltage Display:
> ±5% of reading ±2 counts
Measurement Stability
±10 counts
Automatic Shutoff
Unit will shut off after 20 minutes after last switch activity
Power Requirements
One (1) 9V alkaline battery
Operating Time
Greater than 50 hours, with new battery at 21°C
continuous usage
Operating Conditions
Temperature:
10°C to 30°C
Relative Humidity:
Up to 80%, non-condensing
Altitude:
Up to 2,000 meters
Dimensions
0.94" H x 2.75" W x 4.94" L
(23.9mm H x 69.9mm W x 125.5mm L)
Weight (with battery)
4.9 oz
(140 g)
Voltage Monitor Connection
2.5mm audio jack
CE Certified
Ionization Test Kit Accessories
Desco offers accessories for the Digital Static Field
Meter designed to facilitate routine auditing and periodic
testing of ionization equipment (Ref: ANSI/ESD SP3.3).
The Meter and accessories combination can be used to
test an ionizer’s overall performance. This highly
portable test kit allows the user to make quick and
accurate offset voltage balance level and neutralization
discharge time measurements (counting or using
stopwatch). These accessories are available as Desco
item#
19496
Test Kit Upgrade which includes the
Conductive Plate and Charger.
Figure 5. Installing the 19498 Conductive Plate
12"
18"
Figure 6. Auditing ionization equipment with the Digital
Static Field Meter and Conductive Plate (Ref: ANSI/ ESD
SP3.3)
Desco
19448
Personal HBM Test Fixture
Note:
Desco
19498
Conductive Plate required
The Desco
19448
Personal HBM Test Fixture turns your
model
19492
Digital Field Meter into a Human Body
Model tribo-electric charging tester. This kit will allow
you to measure electrical charges generated on the
human body while walking or moving across an
insulative or conductive surface.
