manualshive.com logo in svg

Desay M8, Руководство пользователя, Страница: 11 / 19

Поделиться
Скачать
Desay M8 Скачать руководство пользователя страница 11

Document:

DS-M8--OPM-1.0M

Page 11 of 19

© DESAY INTELLIGENT CO. LTD.

T

+752 2617 333

[email protected]

WWW.DESAYOPTO.COM

3. Installation Guidelines

Please read the following carefully before installing the panels

3.1 Mechanical

The M8 panels can be installed in two ways: rigging/hanging or stacking/ground support. In either
case, it is important to ensure that the entire screen is correctly aligned both vertically and horizontally,
to ensure there are no visible gaps.

The principle is to build several panels vertically on top of another and horizontally next to another.
The panels are locked together both vertically and horizontally, so that they can form one surface of
screen-configuration.

Locking mechanisms (4 lockers: Up & left ) at the panel does the horizontal & vertical locking of the
panels on to each other. Each panel has been tested with a weight of 2.5tons attached to the bottom
locking mechanism. The Top locker is then attached to a hoist and the whole is lifted into suspension.
As panels are locked to one another, each panel forms a critical element of the complete structure.
Especially when screens are rigged or flown, the top panel of each column (or stack) supports its own
weight plus that of the number of panels underneath in the same column. In the stacked screens,
the bottom panel supports the weight of the whole column.

Lock

Loose

n

Содержание M8




















Отзывы:

Нет отзывов