123677-01A
2
www.desatech.com
Figure 1 - Installing Header
Figure 3 - Installing mantel Base
Base #1
1
1
/
4
"
Screws
AssemblING mANTel
Important:
more than one person is required to lift
assembled mantel. lift mantel by leg assemblies. lifting
by header or mantel top could damage mantel.
Use the following illustrations to assemble mantel. Use only
screws provided.
Figure 2 - Installing top
1
1
/
4
"
Screws
Mantel
Top #5
Assembly
Blocks
IMPORTANT
: Align mantel top left to right before installing.
Back of mantel leg must be flush with back of mantel top
before installation.
IMPORTANT
: Align mantel left to right on base before install-
ing. Mantel legs must be flush with back of mantel base before
installation. Use a tape measure to insure accuracy.
Gas Fireplace Installation
1. Fireplace should be fully assembled. See
Assembling
Fireplace
in fireplace owner’s manual.
2. Place mantel base close to installation location. See fire-
place owner’s manual for installation clearances. Leave
enough room to insert fireplace from back of mantel.
3. Install gas line. See
Connecting to Gas Supply
in fireplace
owner’s manual. Remember to leave access to the gas
shutoff valve somewhere on the base or where it is ac-
cessible to the user.
4. Check for leaks. See
Checking Gas Connections
in fire-
place owner’s manual.
5. Position fireplace inside mantel (see Figure 4, page 3).
Carefully position gas lines.
IMPORTANT
: Use caution
when positioning fireplace on base. Base may scratch
easily. Make sure fireplace is in proper position within
mantel opening before continuing with installation.
Flush
Right Leg
Assembly
#2
Left Leg
Assembly #3
Header #4
Header
Assembly
Block
1
1
/
4
"
Screws
Left Leg
Assembly #3
Right Leg
Assembly #2
Header into
Groove on
Legs
