www.desatech.com
119426-01A
19
INSTALLATION
Continued
Rear Log
Grate
Prongs
Figure 25 - Installing VUL Model Log Sets
Note:
Your appliance may vary from model shown
but log placement will be the same.
Bottom
Log
Base Assembly
Front Right
Log
Front Left Log
6. Place middle left log over front left and
bottom logs as show in Figure 26. Be sure
hole in middle left log seats over pin in
front left log.
CRB and HRB Model Logs Only
1. Place bottom log in center of the base assem
-
bly as shown in Figure 27.
2. Rest rear log in back corner sections of base as
-
sembly as shown in Figure 27. Make sure log is
completely vertical and not leaning in toward
burner where the flame will touch the log.
3. Position front log as shown in Figure 27,
making sure the grooves in the bottom of the
log fit over the grate prongs.
Base
Assembly
Figure 27 - Installing CRB and HRB Model
Log Sets
Bottom
Log
Note:
Your appliance may vary from model shown
but log placement will be the same.
Front Log
Figure 26 - Installing VUL Model Log Sets
Middle
Right
Log
Middle Left Log
Bottom
Log
Pin on Front
Left Log
