www.desatech.com
121623-01A
6
Figure 3 - Assembling Hood
(Mantel Not Shown)
Hood
Screw.
Top.Trim.
Panel
WARNING: Always have
screen in place before operating
fireplace. This prevents exces
-
sive temperatures on fireplace
surfaces.
WARNING: Failure to posi
-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this fireplace
may result in property damage
or personal injury.
ASSEMbLING FIREPLACE
Tools Required:
•. Phillips.screwdriver
•. 5/16".hex.wrench
•. slotted.screwdriver
•. scissors.
1. Remove two screws that hold fireplace
screen.in.place.for.shipping..These.screws.
are. located. near. top. of. screen.. Discard.
screws. Lift fireplace screen up and pull out
to.remove.(see.Figure.2)..Set.screen.aside.
until.installation.has.been.completed.
2.. Remove.all.packaging.from.inside.of.unit.
3.. Remove. bubble. wrap. from. logs. and.
discard.
4.. Check. installation. of. brick. liners.. Brick.
liners are in 4 pieces: 2 sides, 1 back and
1.top.
5. Place hood under top edge of firebox
opening..Use.3.screws.from.hardware.kit.
to mount hood to firebox (see Figure 3).
Screen
Shoulder.
Screw
Figure 2 - Removing and Replacing
Screen (Mantel Not Shown)
ASSEmBLy