ENG
20
WARNING
Risk of eye damage
Never look directly into the beam of light.
Insert power cable
Connect the cable to the mains
Perform a function test before every use:
All LED’s in the light cone must illuminate.
5.3
Transport position
Only transport the light in this position.
OPTICLUX 10-1 C T1
/
OPTICLUX 10-1 P TX
Switch the LED module on/off
Press and hold the button for dimming
OPTICLUX 10-2 C T1 / OPTICLUX 10-2 P TX
A:
Switch the LED module on/off
A:
Press and hold the button for dimming
B:
Switch to Woodlight
6
CLEANING
DANGER
Electric shocks are life-threatening
Switch off the power and secure against
unintended switching on before cleaning.
CAUTION
Damage to property caused by incorrect cleaning
Use only detergents that will not affect the
functional capability of the light.
No cleaning agents containing solvents, chlorine
or abrasive products must be used. Those agents
can cause damage to the plastic parts.
The cleaning agents must be suitable and
approved for plastics like PC, PMMA, PA and
ABS.
Concentrated disinfectants may damage the light.
Pay attention to the specifications from the data
sheet of the agent for concentration and
effectiveness time.
Unsuitable cloths can cause scratches.
CAUTION
Dirt decreases luminosity
Clean regularly to keep the screen clean.
Cleaing only by wiping is permitted.
Clean the PMMA screen with a non-abrasive
cleaning cloth and a suitable cleaning agent.
CAUTION
To minimize the risk of disease transmission, in
addition to complying with this instruction for use, you
must also comply with the applicable occupational
health and safety regulations and the requirements of
national bodies with responsibilities for hygiene and
disinfection.
B
A
Содержание D15953100
Страница 49: ......
