Diamond Shield Crystal
Instruction Manual
Page 11
Bringing into service
Insert the battery
1. Open the battery compartment cover on the back of the
device.
2. Insert the supplied battery. Please keep in mind that the
battery has to be inserted correctly according to its polarity.
(If however the battery is inserted incorrectly, the device will
not be damaged by that.) We recommend using alkaline
batteries or rechargeable batteries)
Changing the battery
The clock setting is maintained for only a few seconds without
battery. Therefore, the battery should be changed quickly. Proceed
as follows:
1. Turn off the device.
2. Remove the new battery from its package.
3. Open the battery cover on the rear panel.
4. On the basis of the old battery you will see the correct
direction of insertion.
5. Remove the old battery and replace it as quickly as possible
with the new one. (The device is not damaged by an
incorrectly inserted battery).
6. If you are using the auto-start programs, you should check
the clock setting.
Connecting the cables
1. Connect the connection cable for the electrodes in the right
socket (above LED)
2. Connect the bracelets or the belt.
3. If you want to work with grounding: Connect the grounding
cable to the left socket. Then connect the ground wire to the
outlet.