Gold
Series
TROUBLESHOOTING
We expect that your experiences with the MegaPeel product and process will always run smoothly. In
case you run into problems, here’s a handful of suggestions.
WHAT IF THE MACHINE DOES NOT TURN ON?
Make sure that cord in the back is plugged in and the power button on the front of the machine is on.
Check the fuse.
Unplug the machine.
On the back of the machine, right of the circular vent, is the black fuse box.
Use a regular, flat-blade screwdriver to pull out the front of the black fuse box.
Again using the screw driver, pop off the red fuse box. If the fuse looks blown, replace it with a new fuse.
From the spare parts kit, take a new fuse, which is a glass-and-steel tube about 1 1/4-inch long.
Using your fingers, remove the old fuse from the MegaPeel.
Install the new fuse.
Throw the old fuse into regular trash.
WHAT IF CRYSTALS ARE NOT COMING OUT OF THE HAND-PIECE? #1
Remove the lid.
Lift the top of the machine.
Lift the white crystal container (the smaller of the 2 containers) from the machine.
To remove the blue tube, push down with your thumb on the small, white plastic piece located on the
crystal container.
Before troubleshooting your MegaPeel be sure that
the crystal cannister is
not empty or the waste filter is not full.
