Derksen PHOS 25, Руководство пользователя

Страница: 4 / 24

Safety Instruc�ons
4 Derksen Lich�echnik
1. Safety instruc�ons
1.1. General understanding of safety
This LED projector is safely assembled and fulfils the legal
requirements for product safety. The following safety in-
struc�ons are designed to help you assess remaining risks
in order to prevent poten�al damage to property or perso-
nal injury. Consider this informa�on on how to use the pro-
jector as an integral part of the product. Keep the
informa�on in a safe place for future reference. Only pass
the projector on to others together with this document. It
provides important informa�on required for safely working
with the product. Please read the informa�on for use care-
fully before installing and using the LED projector. Read the
‘Safety instruc�ons’ chapter in detail and fully familiarise
yourself with it. Always observe the instruc�ons provided
in the usage informa�on for all work carried out. Any pre-
vailing regula�ons on accident preven�on and environ-
mental protec�on, as well as any recognised technical rules
governing safe and proper work, must also be observed.
Your projector’s performance and availability are signifi-
cantly influenced by competent handling and careful main-
tenance. Assembly errors, opera�ng errors and poor
maintenance will lead to breakdowns/malfunc�ons which
could have been avoided.
1.2. Intended use
PHOS move is a compact LED projector (referred to as ‘pro-
jector’ below) for displaying graphics and texts using light
projec�on.
• The projector is only suitable for use in dry areas. Wa-
ter and moisture can damage the projector and result
in electric shock or fire!
• The projector is not suitable for corrosive environ-
ments. (e.g. factory farming, swimming pools, tunnels,
offshore installa�ons, coastal areas up to 1 km from
the sea)
• The ambient temperature should not exceed 35°C.
Otherwise, the projector cannot be adequately cooled
and electronic components may fail prematurely.
• The projector is only suitable for use with projec�on
mo�fs made of glass, otherwise known as ‘glass go-
bos’ or simply ‘gobos’. Do not insert any other projec-
�on mo�fs or objects in the projector! The projector
can be damaged by unsuitable projec�on mo�fs and
can result in fire.
• When using the projector, make sure that the beam of
light does not blind any people, especially if there is a
safety risk posed by temporary glare (e.g. for road
users, people using stairs, etc.)
• Children or cogni�vely impaired people should not
operate the projector. Children or cogni�vely impaired
people must always be supervised near the projector.
• Do not modify or dismantle the projector. Otherwise,
the projector may no longer meet the safety require-
ments. Users may only perform those ac�ons descri-
bed in this manual. Only expert service technicians
may carry out repairs.
• The manufacturer does not accept any liability for da-
mage caused by improper use or assembly.
1.3. Danger of electric shock
Contact with mains voltage poses a risk of fatal electrocu�-
on.
• Only allow a qualified electrician to carry out electrical
connec�ons.
• The projector is a Class I electrical device in accor-
dance with IEC 61140. Ensure that the device is pro-
perly grounded via the electrical connec�on.
• Make sure to observe na�onal regula�ons governing
the opera�on of electrical devices.
• Before doing any electrical work, make sure the mains
supply to the projector is switched off and secure it
against being switched on by unauthorised persons.
• The device is only completely disconnected from the
mains and voltage-free when the mains plug has been
unplugged! Always unplug the mains plug before car-
rying out maintenance work, cleaning or dismantling
the projector.
• The mains cord may not be damaged. Avoid placing
loads on the mains cord. The mains cord must not be
kinked, pulled, twisted or pinched. Do not install the
projector in a loca�on where the cord can be stepped
on by people. A damaged mains cord can cause electric
shock and fire and must be replaced immediately.
• Only operate the device with a fully enclosed housing.