Derksen PHOS 25, Руководство пользователя

Страница: 14 / 24

5.3. Aligning the projector
1. Switch the projector on.
2. Loosen the countersunk screw.
3. Tilt the projector head into the desired posi�on.
(Note: There is a mechanical stop to limit the projec-
tor head’s rota�on and prevent damage to the cable.
Do not �lt or rotate the projector head without pre-
viously loosening the countersunk screw.)
3. Fasten the countersunk screw.
5.5. Aligning the mo�f
1. Loosen the knurled screw un�l the gobo case can be
rotated.
2. Rotate the gobo case un�l the mo�f has been aligned
as desired.
3. Tighten the knurled screw.
Se�ngs
14 Derksen Lich�echnik
3,9 pt
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
5.4 Adjus�ng the focus of the mo�f
1. Loosen the set screw of the lens mount.
2. Reposi�on the projec�on lens within the case un�l
the mo�f is in focus.
3. Re-�ghten the set screw.