Shenzhen Dericam Technology Co.,LTD
Quick Installation Guide
www.dericam.net
Copyright @ Shenzhen Dericam Technology Co., Limited
8
Get Started Remote Access Settings
Fig5.2
Change the http port no. of the camera
Secondly,
enter User name & password of the Administrator (default user: admin, no password), and click the
button ”OK” to apply the modification. The Camera will restart one the modification is done.
Thirdly,
after the camera restart and get connected again, you will find the LAN IP link address has been change to
http://192.168.1.35:88
, and the LAN IP address is fixed at
http://192.168.1.35:88
. It won’t be changed no matter you
re-power the camera or re-power the router.
First of all
,
please make sure whether your ISP
(Internet Service Provider)
provides a
Static WAN IP
address
service or a
Dynamic WAN IP address
service.
We divide two sections of
Remote Access Settings
by
Static WAN IP Service
and
Dynamic WAN IP Service.
If your ISP provides
Static WAN IP Service
please go to
Section A
(Page 9).
If your ISP provides
Dynamic WAN IP Service
please go to
Section B
directly (Page 10).
Note
