Derby cycle Pedelec Скачать руководство пользователя страница 39

Страница: 39 / 70

Originalbetriebsanleitung Allgemein

EN-39

24.3.1 Mechanical derailleur: control

elements
24.3.1.1 Shimano standard gear lever:

version 1

Information

Do not move levers A and B at the same time. If the

levers are moved at the same time, you will not be able

to shift gears.

Fig. 64 Shimano standard gear lever ©Shimano

Left: front derailleur

Right: rear derailleur

Shifting to a higher gear
1. Step on the pedals as you shift gears.
2. Lever A on the left: Move lever A upward. The chain is

moved to a larger chainring. Lever A then returns to its

original position.

3. Lever B on the right: Move lever B upward. The chain

is moved to a smaller sprocket. Lever B then returns to

its original position.

Fig. 65 Shifting to a higher gear ©Shimano

Chainring size

Sprocket size

Shifting to a lower gear

4. Step on the pedals as you shift gears.
5. Lever A on the right: To shift from a high gear to the

next lower gear, push lever A to Click position 1. To

shift two gears down, move lever A to Click position 2.

When shifting, the chain will be lifted to a larger

sprocket. Lever A then returns to its original position.

6. Lever B on the left: Push lever B downward. The chain

is moved to a larger sprocket. Lever B then returns to

its original position.

Fig. 66 Shifting to a lower gear ©Shimano

Chainring size

Sprocket size

24.3.1.2 Shimano standard gear lever:

version 2

Fig. 67 Shimano standard gear lever ©Shimano

Left: front derailleur

Right: rear derailleur

Shifting to a higher gear
7. Step on the pedals as you shift gears.
8. Lever A on the left: Move lever A upward. The chain is

moved to a larger chainring. Lever A then returns to its

original position.

9. Lever B on the right: Push or pull lever B. The chain

is moved to a smaller sprocket. Lever B then returns

to its original position. On certain models, shifting is

done in two stages.

Fig. 68 Shifting to a higher gear ©Shimano

Chainring size

Sprocket size

Содержание Pedelec







































































Результаты поиска

Содержание Pedelec

Отзывы:

Бренды по названию

Популярные бренды

Derby cycle Pedelec, Оригинальное руководство по эксплуатации – Общее

Результаты поиска

Содержание Pedelec

Отзывы:

Бренды по названию

Популярные бренды