20
To proceed with vacuuming liquids
, follow the steps below:
-
make sure the drain valve at the end of the drain tube (detail no. 7, par. 1.1) is in the closed position
(see image below)
- Place the chosen vacuum accessory on the end of the flexible hose.
- Turn the switch (3) LIQUID VACUUM ON/OFF to “
I
”,
- to stop the vacuum, turn the switch (1) to
“O
”.
If after having rotated the switch (3) to
"I"
the vacuum cleaner expels the air instead of aspirate it, the power
supply phases of the plug are wrong.
To restore the power supply phases, rotate the switch to
“O"
, disconnect the plug from the power outlet,
insert a screwdriver into the notch on the inside of the power plug and reverse the two poles by rotating 180°.
Caution!
Before switching the vacuum on again, check that the pump has stopped completely.
During vacuuming, upon reaching the maximum level of liquid, the machine will automatically stop and it will
be necessary to perform the expulsion of the liquid from the tank.
For liquid expulsion, the vacuum has a dedicated pump (detail no. 8, par. 1.1) located inside the tank.
