3.
HANDLING, UNPACKING, AND INSTALLATION SECTION
3.1
Handling
Warning!
The instructions for transporting and unpacking the vacuum correctly are shown
on the packaging as well.
The following instructions also indicate the operations to be undertaken should the vacuum need to
be re-packed or unpacked after subsequent transportation.
The vacuum cleaner must be lifted and handled exclusively using a forklift having
suitable load bearing capacity.
When using a forklift, lift the load 200 mm off the ground and swing backwards.
Always keep the height of the working environment in mind when lifting loads.
Before starting any movement, ensure that the area is cleared and that there are no moving objects on the
packaging. For lifting and handling, apply operating safety laws and normal instructions for fork-lift truck
driving.
3.2
Unpacking
- Cut and unwind the two packaging fixing belts
- Remove the staples that fix the card packaging to the pallet with the aid of a screwdriver (where
applicable)
