Deprag MICROMAT-E 320E19-0002, Руководство по эксплуатации

Страница: 3 / 24

3
1 Safety Tips
1.1. General Safety Tips
Before operating tool, make sure to carefully read and
always observe these operating instructions
.
Generally, the operator of the equipment and/or machinery is responsible for
the equipment’s perfect condition and operation, while observing all
necessary safety regulations. This equipment has been constructed in
accordance with the newest stage of the technology, while recognizing all
necessary safety related requirements. Nevertheless, while operating the
equipment and/or machinery there is a chance of bodily harm to the operator
as well as damage to equipment and/or machinery and other property.
Operate the equipment and/or machinery only
·
if equipment/machinery is used for the task it was designed for and
·
is in perfect working condition and safe to use.
It is important to observe the technical data of the equipment, especially in
regards to the environmental temperatures.
Prerequisite for the safe conduct and the uninterrupted operation of the
equipment is the knowledge of the basic safety tips and the safety
regulations. Additionally, all current regulations for a safe operational area, for
accident prevention guidelines of electrical and mechanical installations, as
well as noise suppression demands must be observed. During any
maintenance or repair work, a clean work surface is recommended. Also, it is
not recommended to either eat or smoke during repair or maintenance.
Arbitrary changes made to the equipment, which alter its designated use,
voids the warranty and cancels the manufacturer’s liability.
·
The equipment is insulated to protect against an electrical power surge.
·
It is not recommended to use this tool in an explosive hazardous
environment, unless it was specifically designed for such a use.
The operating instruction booklet, especially the safety symbols and safety
notes attached to the equipment or included in the documentation, must be
observed at all times by all persons coming in contact with the equipment.