Deprag MICROMAT-E 320E19-0002, Руководство по эксплуатации

Страница: 16 / 24

16
9 Maintenance and Upkeep
Disconnect screwdriver from power supply prior to
disassembly, maintenance and repair!
Only trained D E P R A G personnel is authorized to perform
disassembly or reassembly of this screwdriver.
Only a trained Electrician may perform inspection and maintenance. Incorrect
assembly or disassembly can lead to injury of an operator and damage of the
equipment.
When performing maintenance or repair, please observe that…
·
screwdriver has to be disconnected from power supply.
·
the work are is not disarray and the work surface is clean. Do not eat or
smoke while performing maintenance.
If the following service rules are observed, the screwdriver will have a long life
expectancy and will be safe to use.
·
check tool on a regular basis for external damage.
·
replace worn or damaged bits immediately for they can cause an injury.
·
In case of tool malfunctions, we recommend sending the tool to
DEPRAG.
10 Trouble Shooting
Please refer to the Operating Instructions of the EC-Screwdriving System.
11 Delivery Capacity
Unused machines should be stored in a dry, locked area.
Q
UANTITY
N
AME
P
ART
N
O
.
1 Operating Instruction Booklet 012625EN
1 EC-Screwdriver 405024 A / B / C