Deprag 347F-228, Руководство по эксплуатации

Страница: 11 / 36

11
OUR RECOMMENDATION: The preferred lubricating method for the
screwdriver spindles mounted in fixtures, brackets, machines, etc., each in
connection with a controller, is method b) with Point-of-Use Oiler.
•
Check pressure at directly on the machine. The Regulator needs to be
adjusted to an airflow between 5.0 (71 PSI) and 6.3 bar (90 PSI). A higher
pressure leads to increased wear and tear. A lower pressure may lead to
clutch not being able to correctly shut-off the motor.
In regards to air-quality according to ISO8573-1, we recommend:
C
LASS
R
ESIDUE
OF
O
IL
R
ESIDUE OF
D
UST
R
ESIDUE OF
W
ATER
Content
mg/m³
Particle
Size
µ
m
Concentration
max. mg/m³
Dew
Point
o
C
Pressure
Concentration
max. g/m³
Lubricated Air 4 5 15 8 +3 6
Dry Air 3 1 5 5 -20 0,88
Picture: Connection of a DEPRAG MINIMAT-F-ULTRA Screwdriver