Denzel 27301, Руководство пользователя, Страница: 6 / 28

6
CIRCULAR SAW
EN
d) Store unused electric tools out of the reach of children and do not let persons who are not familiar with electric
tool or these instructions work with electric tools. Electric tools are dangerous in the hands of inexperienced users.
e) Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity
of parts and any other elements of the electric tool affecting its work. Do not use a broken electric tool
until it is completely repaired. Most accidents are the result of insufficient maintenance of the electric tool.
f) Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming
and make work less tiring.
g) Use electric tool and accessories in accordance with this manual and taking into account the working conditions
and nature of future work. Misuse of the electric tool can create a hazardous situation.
Maintenance
Your electric tool must be repaired only by qualified specialists using original spare parts. This will ensure safety
and reliability of your electric tool in further use.
Additional safety measures for circular saws
a) Before starting work make sure that there are no foreign objects in the workplace.
b) Keep hands away from the sawing area and do not touch the saw blade. Always hold the extra handle. When
holding the saw with both hands, you will be protected from cutting by the saw blade.
с) Do not hold your hands below the workpiece. The cover does not provide cut protection with the saw blade
on the bottom of the workpiece.
d) Adjust the cutting depth depending on the thickness of the workpiece. When machining, the saw blade should
protrude to no more than the full height of the tooth.
e) Never hold the workpiece in your hands or on your lap. It is necessary to fix the workpiece on a stable stand
or workbench. This condition is mandatory to reduce the risk of injury when in contact with the saw blade or jam-
ming it.
f) When performing a longitudinal cut always use a stop or straight guide bar. This will reduce the risk of the saw
blade jamming and improve the accuracy of the cut.
g) It is necessary to use saw blades designed for this model of tool, with the corresponding outer and inner
diameters. The use of different adapters leads to increased vibration, reduced quality of cutting and an increased
risk of injury.
h) Never use damaged or incorrectly fitted fasteners (screws, flanges, pressure washers, etc.) for saw blade. These
elements are designed specifically for this model of saw in order to obtain optimal technical characteristics
and safe operation.
i) The tool is not intended for stationary work, there is no possibility of installation on the saw table.
j) Do not use high speed steel saw blades. When operating the saw such discs can easily break and cause serious
injury.
k) Keep the power cord away from the rotating saw blade. If you lose control of your electric tool, the power cord
may be cut or caught by a rotating tooling.
l) Keep the engine in good condition. In case of unusual noise, the smell of burning insulation, sparks, etc. turn
off the tool immediately and contact the service center.
Residual risks
Despite following the relevant safety instructions and the use of safety devices some residual risks cannot be
completely eliminated. These include:
•
risk of pinching fingers when changing tooling;
•
injuries from touching the sharp edges of the tooling;
•
damage to health from exposure to vibration and noise arising at work.